Elmo ProVidient EMR-16, Инструкция по эксплуатации, Страница: 22 / 126

Example of Connection with External Storage Media
■
USB
By connecting USB media to USB Port (ARCHIVE) on the equipment front, video or equipment setup
data can be stored onto it.
Caution
y USB media to be used must be USB-compliant USB mass storage compatible, with power
consumption under 500mA. (However, it does not guarantee connection with all equipment)
For more information, contact the shop staff.
y The media to be used with this equipment needs to be formatted in FAT12/FAT16. Format the media
with PC, etc. before using it with this equipment. As for the formatting method, consult the
instruction manuals of the PC or OS being used.
Example of Connection of PTZ Camera
■ PTZ (Pan, Tilt, Zoom) Camera
Our recommended PTZ cameras can be connected and controlled via RS-485.
Twisted Pair Wire
Twisted Pair Wire
PTC-200C
(End Terminal OFF)
PTC-200C
(End Terminal ON)
L OO P TH RO UG H
NOTE: Supported PTZ Protocols are: ELMO, PELCO D, Panasonic
y When connecting with this equipment using the network function, the RS-485ID
address on the camera side needs to be set according to the camera number. When operating from
EMR-16 using the network function, the camera's ID should be set by the control camera ID.
y (e.g. For connection with Camera 3, set the RS-485ID address on the camera side to the same set
number for Camera 3.)
- 16 -
Caution