Elmo Pro v.1.403.16 Скачать руководство пользователя страница 60

Страница: 60 / 156

1.3.10.6. Video Loss Alarm

Video Loss Alarm allows automatically initiating control and/or sound alarm upon video loss of one or more video channels.

To configure the Video Loss Alarm menu, do the following:

1. Check the

Enable Control

checkbox to enable control function for Video Loss Alarm

Click the

Browse

button

to select desired control from the drop-down menu. In the example above, Control

2 will be activated after the video loss detection.

Tip

Take into account the active time for the
selected control. The control active time is
configured in the Hardware Setup.

3. Check the

Enable Alarm

checkbox to initiate audible alarm after the video loss detection.

4. Set

Working Time

for an audio alarm and selected control. In the example above, after the video loss has been

detected on one or more video channels, the audible alarm will sound on the PC speaker for 5 seconds and Control
2 will be activated for 5 seconds (provided the video loss detection does not conflict with control active time, if ap-
plicable).

Click the

Save

button

to save the configured settings

Tip

In the E-Mail Setup tab, check Enable E-mail
for Video Loss to receive an e-mail every
time video loss occurs on one of the chan-
nels.

Related Topics:

Hardware Setup-Control Settings | E-Mail Setup

1.3.10.7. Panic and Sensor Backup

Tip

To use this feature, ensure that there is a
blank CD-R/DVD-R at all times in the combo
drive.

Configure the recording settings for the main screen’s

Panic

button feature and/or associate the backup with specific

sensor(s). If a Sensor is triggered, or the

Panic

button

is clicked, an encrypted video backup will be burned onto

a CD-R/DVR-R.

By default, the sensor/

Panic

button feature backs up 5 minutes of video recording prior to the sensor/

Panic

button

activation. The user, however, can configure the length of time that DVR will record after the sensor/

Panic

button

activation.

ELMO-PRO v.1.403.16 - User Manual

System Setup

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Содержание Pro v.1.403.16





























































































































































Результаты поиска

Содержание Pro v.1.403.16

Отзывы:

Похожие инструкции для Pro v.1.403.16

Бренды по названию

Популярные бренды

Elmo Pro v.1.403.16, Руководство пользователя

Результаты поиска

Содержание Pro v.1.403.16

Отзывы:

Похожие инструкции для Pro v.1.403.16

Бренды по названию

Популярные бренды