- 19 -
Figure 2. Sample diagram of alarm installation with a buffered power pack.
+
OUT2
OUT3
_
Z1 buffer
Siren
Strobe
External siren
12VDC/1A
+
-
Phone dialer
GN
D
+12V
Tamper
R 10kOhm
Tam
per
Alarm
Arm
ed
GND
OUT1
TAMP
VDC
Fig. 2
Z2
Power Failure
AKU
CB32
power pack
GSM
GSM Phone
AC Power
Pack
SPECIFICATION
▪
superheterodyne receiver 433.92 MHz, sensitivity better than -102dBm,
▪
supports up to 32 Elmes wireless detectors defined as alarm zones,
▪
supports up to 16 named users (inclusive of 4 administrators),
▪
interface to a GSM phone (SMS/CLIP notification) accepting AT commands,
▪
non-volatile EEPROM memory of last 256 events,
▪
polymer fuse protected outputs OUT1-3 with up to 1A current draw,
▪
internal siren/buzzer with alarm sound level - 92dB (at 40cm distance),
▪
included AC power pack with 9-12VDC/150mA output,
▪
backup power with two AA rechargeable batteries of up to 2000mAh each,
▪
up to 72 hours autonomy operation with two 1800mAh rechargeable batteries,
▪
external dimensions (without antenna): 110/122/32mm (width/height/thick),
▪
indoor use only, with temperatures range from 0 to +40 ºC.
Manufacturer:
Elmes Electronic, 54-611 Wroc
ł
aw-PL, Ibn Siny Avicenny 2,
Phone: +48717845961, Fax +48717845963, e-mail: [email protected]
Certified BY Z.R.T.O.M. “TECHOM” (PL) No. 106/05 - class “B”
- 20 -
The product complies with the requirements of the following security standards:
1.
PN-93/E-08390-14:1993 Alarm systems - General requirements –Application
2.
PN-EN-50130-5:2002 Alarm systems – Environmental tests
Elmes Electronic declares that the product has been designed and
manufactured to comply with the EN 60950-1 electric safety standard,
the EN 301 489-1 electromagnetic compatibility standard and the EN
300 220-3 radio standard.
LIMITED WARRANTY
The manufacturer of this product warrants the original purchaser that for a period of 24-months as
from the date of purchase, the product shall be free of defects in materials and workmanship in
normal use. During the warranty period, the manufacturer shall, at its option, repair or replace any
defective product upon return of the product to the manufacturer, at no charge for labor and
materials. The defective product must be delivered to the point of purchase in a clean condition
and at buyer’s own expense, along with this guarantee with the date of purchase confirmed below,
and a short description of the failure. The cost of dismantling and installing the device is covered
by the user. The warranty does not cover batteries and damage arising from improper use or
handling, unauthorized adjustments, alterations and repairs.
Date and place of purchase
…………………….. ..........................................................
The use of WEEE symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly you will protect the
environment. For more detailed information about the recycling of this product, please
contact your local authority, your household waste disposal service provider or the shop
where you purchased the product.
Copyright: Elmes Electronic – all rights reserved.