Operation manual ISOTEST 4 S / 4 S
p l u s
Page 29
Changing the operating mode of the safety button
- only for testers with double-stage safety button (optional)
Enabling and disabling the safety shut-off function
After the test equipment is turned on,
turn rotary switch "Filter" to the position
with the symbol for the desired
operating mode of the safety button.
The blue LED adjacent to the symbol
for indicating the actual operating mode
flashes.
Press and hold the safety button at the
handle.
After a short and a long hooter alarm,
the new operating mode is enabled.
Now, the blue LED adjacent to the
corresponding symbol for the newly
selected operating mode flashes.
Release the safety button and turn
rotary switch "Filter" to its position
"Standard". The blue LED adjacent to
the symbol for the selected operating
mode is lit. The test equipment is now
ready for use.
Press the safety button with
low pressure
(Trigger point „1“)
Changing Filter Settings
Increasing or decreasing filter settings
Use rotary switch "Filter" to select the
required filter setting.
(in this example: "S2")
The filter function is described in
Chapter "Additional Information".
