1
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200567_01B ©2016 ELMDENE INTERNATIONAL LTD
27.6V
DC
S
WITCH
M
ODE
P
OWER
S
UPPLY
M
ODULES
W
ITH
B
ATTERY
M
ONITORING
Models:
G240xBMU
Where ‘x’ is max load current: 1A, 2A, 3A or 5A
F
EATURES
High efficiency cost effective power supply ideal for use in Fire, Access Control and General Security
applications. Featuring a regulated 27.6Vdc output supplying continuous full rated current to load and up to
an additional 0.5A for charging 2 x 12V standby batteries. Maximum battery life is assured using Deep
Discharge Protection to prevent premature battery failure when operating in standby mode for extended
periods. Two sets of volt-free contacts are provided to signal (i) loss of mains and (ii) battery and loss of
output faults. The universal mains input voltage enables the power supply to be used across a wide
geographical area. The highly efficient switch mode design ensures low operating costs while generating less
heat. The modular construction simplifies maintenance
.
•
Universal mains input voltage 90-264Vac
•
Additional 0.5A to charge 2 x 12V standby batteries
•
High efficiency electronics for reduced running costs and lower
operating temperatures
•
Continuous full rated current to load
•
Volt free contact signalling mains failure
•
Volt free contact signalling battery and output faults
•
Deep Discharge Protection
•
Installer safe design with all high voltage electronics fully shrouded
•
Reverse battery connection protection
•
Full electronic short circuit and overload protection on load output
•
Mains transient protection circuit
•
Modular construction for ease of maintenance & installation
•
Green Mains present LED
•
Orange Battery Charging LED
•
Yellow Fault LED
Elmdene International Ltd
Tel: +44 (0)23 9269 6638
3 Keel Close, Interchange Park,
Fax: +44 (0)23 9266 0483
Portsmouth, Hampshire, PO3 5QD, UK
Web: www.elmdene.co.uk
