Elma Watch-Matic III Скачать руководство пользователя страница 6

 

Description

 

© Elma GmbH & Co KG 

BA/watch-matic lII/GB/0108 

5

Rate deviation, amplitude and beat error of mechanical watches 
and diagram recording of the beat noises. 

Measuring

possibilities

Automatic determination of all common beat numbers. Manual 
selection for less common beat numbers. Manual selection for 
any beat number in the range between 3'600/hour to 36'000 
b/h. Automatic determination of an unknown beat number. 

Beat number

Automatic gain control. Manual control possibility for watches 
with side noises or unusual beat noises. 

Gain control

Presentation of the diagram on LCD graphic display, resolution 
of 64 x 256 dots. 

Diagram

Time scale: selectable from 1 to 9 mm/ms. 4 different speeds 
for the diagram recording. Visible diagram length: 128 mm. 

Numeric display in s/d or 0.1 s/d. 

Rate measurement

Resolution 1 s/d, measuring range: ±999 s/d or Resolution 0.1 
s/d, measuring range: ±99.9 s/d. 

Numerical display in milliseconds. 

Beat error

Resolution: 0,1 ms. Measuring range: 9,9 ms 

Numerical display in degrees.  

Amplitude

measurement

Resolution: 10 , measuring range: 700  to 3600 . 

Lift angle: adjustable from 100  to 900. 

Selectable measuring time: 2, 4, 8, 10, 20, 30, 60 s and 
automatic selection of the minimal measuring time. Continuous 
averaging over the measuring time computed every 2 s. Screen 
display of  the computed diagram section showing the rate 
measurement. 

Measuring times for

the numerical results

At any time, the momentary screen-display can be stopped as 
long as requested. 

Function stop/start

Integrated loudspeaker to listen to the beat noises. 
 

Acoustical check

Interface RS232 for connection of a printer or a calibration 
system. Printout of the numeric results or graphic printout of the 
full screen presentation with diagram. 

Protocol print-out

High frequency quartz. Stability: max. +/- 0.08 s/24h in a 
temperature range from 200 to 400. 

Time base

Display

LCD-graphic display 64 x 256 dots. 

Mains adapter 230V~ or 120V~, 12VA. 

Mains connection

Stand microphone, can be turned in any desired position. 

Microphone

 

 

Содержание Watch-Matic III

























Отзывы: