Putting into Operations
3.3
Technical details
Mains voltage (as per
version
) (Vac)
100-120
or
240-240
Mains frequency (Hz)
50 / 60
Operational connected loads (W
)
140
Air Output (m
3
/h)
370
Rotational Speed (rpm)
2800
External measurements W / D / H (mm)
410 x 290 x375
Weight (Kg)
12,3
Material of housing
Steel sheet painted
4
Putting into Operations
Compare voltage on type-plate with the voltage in your
workshop.
Place the unit onto a stable surface. Keep the unit dry!
The polishing wheel is screwed onto the polishing tip in a
clockwise direction until it has achieved the necessary
tightness. Care should be taken that the polishing wheel does
not wobble.
Connect the equipment to the mains supply. The prescribed
supply voltage can be taken from the name plate on the back of
the machine.
Switch with the plug switch the engine on. The exhaust fan is
switched on and off automatically by the switch.
If larger workpieces are being polished, the cover of polishing
can be removed. See the section on MAINTENANCE.
Preparation
polishing wheel
installation
Equipment at
electricity mains
attach
Polishing engine
switch on
© Elma Schmidbauer GmbH
BA_Polini_EN_Vers.01.2014
5
