Elma Schmidbauer GmbH
About this manual |
Elmasonic Med
5 / 32
1
About this manual
IMPORTA
NT
Please read the manual before using the product. This manual forms part of the
contents supplied with the unit. Keep the manual in an accessible place close to the
product, and keep it with the product if it is sold on.
Meaning of the symbols used:
This symbol denotes lists.
This symbol denotes requirements.
Numbers with a dot denote actions.
This symbol denotes individual actions.
This symbol denotes interim results.
This symbol denotes the result of your action.
Numbers without a dot denote image labels.
1.1
User
In the manual, the term
User
refers to all persons who transport, set up, connect, operate and
maintain the unit. The manual is aimed at persons with appropriate technical knowledge and
experience in handling similar units.
Users must have read and understood the manual and be capable of following all notes and
instructions.
All tasks that go beyond the pure operation of the unit within the scope described here must be
performed by qualified and authorised specialists.
1.2
Other applicable documents
In addition to the specifications given in this manual, the following documents and directives also
apply and may take precedence. This list is not exhaustive:
• Regional safety regulations and other locally applicable provisions.
• Safety data sheet and dosing instructions of the cleaning agents used.
• All serious incidents that occur in connection with the product must be reported to the
manufacturer and the responsible authority of the member state in which the operator and/or the
patient are resident.
1.3
Factory settings
The unit is delivered with predefined factory settings that determine the type and version of various
unit functions. All information given in this manual is based on the use of a unit that is being operated
with the factory settings unchanged.
Unit functions can be customised in
Setup
mode. If this has been done, the unit functions can differ
from the information given in this manual. If discrepancies are found, the unit can be reset to the
factory settings [
