SwemaFlow 125D
side 12
botton to toggle between the freezed values (freezed air flow, temperature
and barometric pressure).
Save measurement (BLACK button hold down)
If a measurement is freezed it can be stored by holding down the BLACK button for 2 sec.
The display will show which note number (ex. n.001 = Note 1) the measurement is saved
at in the note book and then return to measuring
mode.
Note book (notE)
If GREY button is pressed two times when in BP Mode notE will be displayed. To enter the
note book press the BLACK button.”n.xxx” (xxx will be the number of the last saved note,
see ”Save measurment”) will be shown in the display. With GREY and BLUE button it’s
possible to scroll through the saved notes. To return to notE press RED button.
To see saved mearsurment in a note press BLACK button. With GREY and BLUE button
it’s possible to scroll through the saved measurements in the note (air flow, temperature
and barometric pressure). To return to notes (n.xxx) press the RED button. To erase the
note memory hold down the BLACK button for 2sec, ”E ALL” (Erase All?) will be shown in
the display.
To return to notes press the RED button, to erase all notes hold down the BLACK button
fro 2sec. After all notes are erased ”notE” will be shown in the display, press GREY button
to go to BP Mode.
