Elma Instruments Elma 1500B, Руководство пользователя

Страница: 44 / 51

44
Instruments must be stored in dry and closed
areas. In the case of an instrument being
transported in extreme temperatures, a recov-
ery time of minimum 2 hours is required prior
to instrument operation.
2.0 Safety Measures
The instruments Elma 1500B have been con-
structed and verified in compliance with the
safety measures for voltage testers DIN EN
61243-3, DIN VDE 0682 Part 401 (previously
DIN VDE 0680 Part 5), EN 61010, and IEC
1010 and have left the factory in safe and
perfect condition.
In order to avoid electrical shock, the valid
safety and VDE regulations regarding
excessive contact voltages must receive
utmost attention, when working with volt-
ages exceeding 120V (60V) DC or 50V
(25V)rms AC. The values in brackets are
valid forlimited ranges (as for example
medicine and agriculture).
Prior to measurement ensure that the test
leads and the test instrument are in per-
fect condition.
When using this instrument only the han-
dles of the probes may be touched – do
not touch the probe tips.
The test instrument may only be used this
instrument may only be used within the
ranges specified and within low voltage
systems up to 690V.
Prior to usage ensure perfect instrument
function (e.g. on known voltage source).
The voltage testers may no longer be
used if one or several functions fail or if no
functionality is indicated.
Do not use this instrument under damp
conditions.
If the operator’s safety cannot be guarant-
ed, the instrument must be removed from
service and protected against use.