Installing the Pads
The pads have a polishing side, and a Velcro side that attaches to the pad holder.
Pad installed
INCORRECTLY
Pad installed
CORRECTLY
1. Place each pad to be sure it is centered within each pad
holder.
Bend the Pads lightly with fingertips, and fit
t
he hole in the middle of the pad over the
center pin of the Pad Holder
2. Press the center of the Pad lightly after placing it into the Pad Holder to attach the Velcro.
If the pads have been used before, make sure they are clean and dry before reusing them.
See How to Clean the
Pads
on
page
16.
NOTE : If the pads are not dry , the final disc finish will be hazy.
Helpful Hint : Buy another set of pads for quicker change overs.
This way you have a clean.
set
of
pads
ready
to
be
used.
13
Revision
#
v
8.
2
.20
22