ellman Surgitron 4.0 Dual RF/120 IEC, Инструкция по эксплуатации

Страница: 12 / 28

11
4.2.7 Footswitch Mode Selector:
This mode selector is used to control the selection of CUT or COAG modes. However, in
the advance Surgitron 4.0 Dual RF/120 IEC unit, this mode selector is controlled by a dual
footswitch.
See section 4.0.1 for detail.
4.2.8 Yellow Light Indicator:
The light indicator will be "ON" only when the "CUT" control footswitch pedal is depressed
in Surgitron 4.0 Dual RF/120 IEC model.
4.2.9 Blue Light Indicator:
The light indicator will be "ON" only when the "COAG" control footswitch pedal is
depressed in Surgitron 4.0 Dual RF/120 IEC model.
4.2.10 Cutting Mode Function Selector: (Select)
It is for selecting Cut or Cut/Coag functions. See section 4.0.2. for Three-Button
Fingerswitch Handpiece application.
4.2.11 Yellow Light (Cut) Indicator:
The indicator illuminates when Cut function has been selected. See section 4.0.2. for
Three-Button Fingerswitch Handpiece application.
4.2.12 Yellow Light (Cut/Coag) Indicator:
The indicator illuminates when Cut/Coag function has been selected. See section 4.0.2.
for Three-Button Fingerswitch Handpiece application.
4.2.13 Output Power Intensity Indicator:
The default state is zero when On/Off power switch is turned on. See section 4.0.1 for
special features of the power storage. The output power will remain at the selected level
unless it is changed . For true output power, see Figure Output Power Intensity vs. Power
Setting. The number displayed indicates the relative power, which will be delivered to the
patient when the mode is activated.
See section 4.0.2.2 for three-fingerswitch handpiece
application.
4.2.14 Power-up Push Button for Cutting Mode:
A single depression of the button switch increases the power setting by one. Continuous
depression gradually increases the power to maximum - 100.
See section 4.0.2. for three-
fingerswitch handpiece application.