Ellisys Bluetooth Explorer 400, Руководство пользователя

Страница: 63 / 201

B
lueto
o
th
Ex
pl
o
re
r
4
0
0
To capture USB HCI:
1. Select the Wired tab.
2. Check the USB HCI check box.
3. Click OK .
4. On the front panel, connect the both sides of this interface to the USB STD-A and USB
Micro-B connectors on the analyzer’s front panel.
5. Click on Record on the toolbar.
The analyzer is designed to capture only Bluetooth device class traffic (USB
Device Class = Bluetooth) through the USB front panel ports, or vendor-
specific USB traffic adhering to Bluetooth class structure. Capture of USB
traffic not using Bluetooth device class or structure is not supported.
To capture UART HCI:
1. Select the Wired tab.
2. Check UART HCI (Primary) check box.
3. Click OK .
4. Attach the Flying Leads Cable between the IO Probe connector on the analyzer’s back-panel
and the signal and GND lines on the UART HCI. Use default pin assignments shown in
Recording Options , or select custom pin assignments. Assign custom names to inputs as
desired. See Appendix A – Flying Leads Cable for details.
5. Click on Record on the toolbar.
To capture a second instance of UART HCI:
1. Select the Wired tab.
2. Check UART HCI (Secondary) check box.
3. Click OK .
4. Attach the Flying Leads Cable between the IO Probe connector on the analyzer’s back-panel
and the signal and GND lines on the UART HCI. Use pin assignments shown in
Recording
Options , or select custom pin assignments. Assign custom names to inputs as desired. See
Appendix A – Flying Leads Cable for details.
5. Click on Record on the toolbar
Capturing Traffic | 63 of 201