
B. UNPACKING AND CLEANING YOUR APPLIANCE
Remove tape and any labels from your fridge before using (except the rating label).
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to
remove tape or glue. These products can damage the surface of your refrigerator.
Clean your freezer before usage: use a sponge, cloth or paper towel and mild detergent in
warm water to clean outside and inside of freezer, door liner and gasket. Rinse and dry
thoroughly.
Do not switch on the fridge immediately after vertical placement
.
Turn it on after a 6
hours period to ensure proper operation.
Allow the freezer to cool 2 to 3 hours before filling it with
frozen food
.
C. HANDLE INSTALLATION
(SOME MODELS
)
Note: Figures in the image are for reference only.
The refrigerator must be disconnected from the source of electrical supply before starting the
installation.
16
First, take out the two crisscross-screws and install them into the door holes, then turn the
screws until they are set in place (reach the substructure)
Position the handle over the screws
Put the other set screws in the hole on the side of the handle and turn until tight.