4
Installing / Changing Battery
• Remove the cap (Image 1).
• Grab the upper section of the unit with one hand, the bottom half with the other,
and pull apart (Image 2) to reveal the battery chamber.
• Place 1 AA battery into the compartment, making sure the positive pole (+) is facing
the bottom of the unit.
• Slide/snap the unit’s bottom casing back into place (Image 2).
How to Use
• Remove the cap (Image 1).
• Slide the switch located on the side of the unit upward into the “ON” position (Image
3). The light will automatically turn on when the unit is “ON”.
• Gently press the head of the unit flat against your skin. The unit should not be on an
angle. Proceed making small circular motions to remove unwanted hair (Image 5).
NOTE: It is normal for the head to become warm with use.
Cleaning (Be sure unit is off)
• Twist the rotating hair removal head counter-clockwise and lift off (Image 4).
• After each use, clean the head by using a brush (included) to wipe away the hair
residue.
• Empty any hair from the body of the unit by turning it over and gently tapping
the sides.
• To put the hair removal head back on the unit, line up the “groove” indicators on the
cap with those on the unit and twist clockwise (Image 4).
Tips & Pointers
• For superior results, use on hair ¼” in length or less.
• If the unit begins to slow down, clear the hair removal head and body of any hair
residue. If the unit is still running slow change the battery.
• Gentle enough to use every day.
NOTE: Prior to first use, test the on a small area. If any sensitivity or allergic
reactions occur, discontinue use immediately. Do not use your device on sensitive
or irritated skin.
3
4
5
2
1
INSTRUCTION MANUAL FACIAL HAIR REMOVER
EN
