background image

- 16 -

^

^

^

^

^

^

^

^

^

^

0

6

12

18

24

°C

°C

St

 - transition of 

summer winter time 
(daylight savings time) *

setting the time - fi rst 
hours are set followed 
by minutes - upon 
confi rmation of the value, 
the hidden second timer 
is zeroed out

OFF

 - setting the non-

freezing temperature 
for the 

OFF

 mode, 

range 6-20 °C

 

1.1.12

 - setting data - fi rst the 

year is set (range 12 - 99, 
meaning 2012 - 2099), then 
the month followed by the day
- the day of the week is set 
automatically according to 
the entered data

setting the 
temperature and time 
for vacation mode **

oFF

 - switched off 

The set value means a shift in local time (time zone) against UTC, range -1 to +2  (covers the countries in the EU). For EU 
countries it is valid that the time shift always occurs at 1:00 UTC, it is thus necessary to know the time zone to fi nd out at 
what time in local time the winter and summer daylight savings time shifts are to occur.

** In the upper row, the period of vacation timer is shown in hours or days, and the lower row indicates the required temperature. 

By pressing and holding 

^

 you unlock the temperature to settings and by short presses of the buttons 

^

^

 you set the 

required temperature. By pressing and holding the button 

^

 you confi rm the set temperature while switching into the 

setting of the time range of the vacation timer - days or hours - and further units and tens of days or hours.

Содержание RFTC-50/G





















Отзывы: