GDE70266-00
04/2020
4/4
ELKO Smart
EKO07115, EKO07116, EKO07117
Inserting the battery
WARNING
CHEMICAL BURN HAZARD
Keep batteries out of reach of children. If
swallowed, seek immediate medical attention.
Failure to follow these instructions can
result in serious injury or death.
1
Press the battery cover.
2
Slide towards right to remove.
3
Insert the battery with plus (+) symbol facing
outward.
4
Secure the battery cover by pressing and
sliding towards left.
The new battery cover is designed with
child lock protection.
Replacing the battery
Dispose used batteries as per statutory
regulations.
Operating elements
J
Setup/Reset button
K
Status LED
Setting the device
Remove the rocker from the device to see
the status LED.
Connecting to the ELKO
SmartHUB
Short press (< 0,5 s) the Setup/Reset button
3 times to connect to an available Zigbee
network. The status LED blinks amber and then
turns green upon successful connection to the
Zigbee network.
For more information refer to the system
user guide.
Pairing to other ELKO Smart devices
To control products in a room control mode, it can
be paired with other ELKO Smart devices within
the same Zigbee network.
Resetting the device
Short press (< 0,5 s) the Setup/Reset button
3 times and then long press (> 10 s) the Setup/
Reset button once to reset the device to factory
default mode.
The status LED blinks red and then turns red
upon successful reset of the device.
After the device is reset all the
programming and network data will be
deleted.
Troubleshooting
Refer to the system user guide.
Technical data
Battery
CR2032
Battery life
Up to 5 years (depending
frequency of use)
Max transmitted
power
≤10 dBm
IP rating
IP20
Frequency band
2.4 GHz
Range
100 m open space
Operating
temperature
-5 °C to 45 °C
Relative humidity
10% to 95%
Certification
Zigbee 3.0
Dispose of the device separately from
household waste at an official collection
point. Professional recycling protects
people and the environment against
potential negative effects.
Trademarks
• Zigbee
®
is a registered trademark of the
Zigbee Alliance.
• Apple
®
and App Store
®
are brand names or
registered trademarks of Apple Inc.
• Google Play
™
Store and Android
™
are brand
names or registered trademarks of Google Inc.
Other brands and registered trademarks are
properties of their relevant owners.
EU Declaration of conformity
Hereby, ELKO, declares that this product is in
compliance with the essential requirements and
other relevant provisions of RADIO EQUIPMENT
DIRECTIVE 2014/53/EU. Declaration of confor-
mity can be downloaded on: ELKO.no.
ELKO
ELKO AS, Sandstuveien 68, 0680 Oslo
Phone.: +47 67 80 73 00 - E-mail: [email protected]
Pb. 6598 Etterstad, 0607 Oslo
www.elko.no
|
↓
|
|
|
E
C
D
B
A
>
>
>
>
en
SmartSwitch Push Wireless
Prerequisites
Download the
ELKO
Smart app
to your smart-
phone/tablet and install the
ELKO SmartHUB
to
configure and control
ELKO
Smart devices.
Additional system information
Detailed product information is available
online in the
system user guide
: Scan the
QR code or follow the link.
For your safety
DANGER
HAZARD OF ELECTRIC SHOCK,
EXPLOSION, OR ARC FLASH
Safe electrical installation must be carried
out only by skilled professionals. Skilled
professionals must prove profound knowledge
in the following areas:
• Connecting to installation networks
• Connecting several electrical devices
• Laying electric cables
• Safety standards, local wiring rules and
regulations
Failure to follow these instructions will result in
death or serious injury.
Work on the power supply is necessary
if you are mounting the device onto a wall
box with 230 V AC cables or an existing
switch/socket outlet combination.
Getting to know the product
The SmartSwitch Push Wireless (hereinafter
referred to as
device
) is used to control a group
of Zigbee devices within the same Zigbee
network.
The device can be configured through ELKO
Smart app or can be paired with other ELKO
Smart devices.
By default, the device is operated as 1-gang.
It can also be configured to operate as 2-gang
device.
For more information on 1-gang to 2-gang
configuration, refer to the system
user guide.
Package contents
A
SmartSwitch Push Wireless
B
Battery
C
Adhesive pads
D
Adhesive silver foil
E
Installation instructions
The wall box, wall plugs and screws are
not included in the package.
Mounting elements
F
Fixing frame
G
Front cover
H
Locking ring
I
Rocker
Mounting the device
•
For wall box, wood or wall use mounting
screws.
• For suitable surface, use adhesive pads.
• For glass surface, use adhesive pads
and adhesive silver foil.
• While mounting the device, the arrows
on the fixing frame must point upwards.
Note:
Do not install the device on a metal
surface, as it affects the wireless communication
and performance of the device.
Mounting using screws
1
Remove the rocker.
2
Remove the locking ring and the front cover.
3
Mount the fixing frame on the surface using
screws.
4
Secure the locking ring, front cover and
then the rocker on the fixing frame.
Mounting using adhesive pads
•
Affix the adhesive pads
C
at the four corners
on the rear side of the fixing frame.
• Mount the device on the surface.
Mounting using adhesive silver foil
The adhesive pads
C
must be affixed to
the fixing frame.
• Paste the adhesive silver foil
D
on the surface,
avoiding bubbles or folds in the foil.
• Mount the device on the adhesive silver foil.
|
|
|
|
>
>
>
>
>
>
>
>
1
F
H
G
1
2
3
4
>
>
>
>
I
3× < 0,5
×1 s
s
↓
…
↓
3
4
2
3
3× < 0,5 s + 1× 10 s
↓
…
↓
4
2
3
4
2
A
1
J
K
↓
3
1
2
1
2
4
>
>
>
>
D
C
http://pr
off.elko.no/elko-smart
fi
en
