15
Elkay Manufacturing Company
Installation Manual (2000000029 Rev. B - 01/22)
Countertop
Magnetic Key
Pouch lid
Countertop
Unit
7. Confirm once all slots and CO
2
are finalized.
8. The Priming screen will appear, and the unit will begin
to dispense the contents from each pouch to catch the
small amount of liquid dispensed during Priming, place
a cup under the dispenser. This process only takes a
few seconds to complete.
9. When the Priming process is complete, the Home
screen will appear, and the unit is ready for use.
10. The Elkay Smartwell customer portal should now be
accessible if the unit is connected to the Internet.
Login and confirm the unit appears in the listing page.
11. Once complete, place the lid on top and slide back
until closed. Move the magnetic key into the lock
position, then remove the key and store in a secure
place.
1
1
2
222222
2
22
22222222222
3
6.3 Purging the Water Lines
1. Open the water supply valve and purge the trapped air
from the water line.
Note:
To flush out trapped air, allow water to run
continuously until the flow is free of air bubbles.
NOTICE
Water pressure that does not
meet the minimum pressure
requirement of 40 psi can cause damage to the
internal components. Low pressure may also
affect the performance of the unit and the taste of
the beverage.
a. Place a container under the dispenser nozzle.
b. Press the Still water button on the touch screen
and begin dispensing water.
c. Dispense a minimum of two gallons of still water to
purge trapped air from the internal water line and
the filter. This will also fill the water cartridge and
flush out fine carbon particles from the new filter.
d. Press the Sparkling water button on the touch
screen and dispense about 15 ounces of water.
Wait about 30 seconds to allow the carbonator tank
to refill. Dispense another 15 ounces of water. Wait
another 30 seconds to allow the carbonator tank to
refill.
2. Slowly open the CO
2
tank regulator valve on top of
the CO
2
tank counterclockwise until it is fully opened.
OPEN
463b
