Page 7
98518C (Rev. B - 2/10)
LZWSR*1A
2.25
Bottom View of Cooler
Fig. 12
Alternate Filter Mounting Location
Fig. 13
A
B
3/16” Dia. Hole
EXISTING
HOLES
1-3/8” Dia. Hole
SCREWS
PLASTIC BUSHING
SCREWS
FILTER MOUNTING BRACKET
FILTER ASSEMBLY
ALTERNATE FILTER MOUNTING LOCATION
1) Using the supplied punch from the Bottle Filler installation, punch a 1-3/8” dia. hole “A” at the existing hole shown in
Fig. 12.
2) Drill a 3/16” dia. hole at location “B” shown in Fig 12.
3) Remove Filter bracket from filter assembly and reinstall as shown in Fig. 13. Be sure the 3/8” water inlet is facing out.
4) Install plastic bushing (supplied) as shown into 1-3/8” hole, bushing must be used so waterlines will not be cut by
sharp edges of base plate.
5) Install filter assembly to bottom of cooler as shown in Fig. 13 with 2-#8 sheet metal screws.
6) Run the inlet and outlet water lines to filter.
7) P/N 98551C - LZ Filter Mounting Cover may be order to enclose the filter beneath the cooler.
3/8” WATER INLET
