Page 11
1000002481 (Rev. C - 11/15)
LZSTL8WS_2D
INSTRUCTIONS TO MOVE THE BOTTLE FILLER & BASIN
TO THE LEFT SIDE (NON-REFRIGERATED) FOR ALTERNATE MOUNTING
VERSATILE BI-LEVEL
Using a 5/16" socket, remove
the (4) screws from the bottom
of each cooler to remove the
wrappers.
Using a #T20 (6 point star bit),
loosen the shroud screws.
Both sides, both coolers.
ONLY move the filler panel and j-clip
to the refrigerated (right) side
if right side will be mounted 'high'.
WARNING:
Disconnect electrical power.
Refrigerated Cooler Side:
1. Carefully lift and tip the shroud/basin assembly off the cooler frame.
2. Disconnect two (2) black wires coming from the shroud assembly.
•
Black wire that connects from shroud assembly to solenoid valve
•
Black wire that connects to white wire coming from power cord
3. Disconnect the water line at the solenoid valve. Reference Figure 10 for
operation of quick connect fittings.
Non-Refrigerated Cooler Side
1. Carefully lift and tip the shroud/basin assembly off the cooler frame.
2. Disconnect two (2) black wires coming from the shroud assembly.
•
Black wire that connects from shroud assembly to solenoid valve
•
Black wire that connects to black wire coming from power cord
3. Disconnect the water line at the solenoid valve. Reference Figure 10 for
operation of quick connect fittings.
