Elkay Manufacturing Company
(630) 574-8484
1000005449 (Rev. B - 08/21)
Page 6
• Power tools should only be connected to a circuit
protected by a ground-fault circuit interrupter
(GFCI).
•
If an extension cord is required, always use an
appropriate extension cord.
Shock and Electrocution Hazards
Failure to follow these instructions could result
in severe electrical burns, significant injuries,
and even death.
Water will conduct electric current to
create a short circuit, resulting in
injury or death.
• Never use electric power tools around water or
wet floors/surfaces.
• Keep all liquids away from electrical cords and
power tools.
•
If an extension cord is required, always use an
appropriate extension cord.
• DO NOT create a short circuit between a source
of electricity and a liquid by being in contact with
both simultaneously.
WARNING
Contacting live electrical wiring with
power tools or hand tools can cause
serious injury or death.
• Make sure all related circuit breakers are turned
OFF.
• Test for live circuits or wiring inside any wall
where installation of the product requires cutting
into a wall.
Prior to any maintenance, make sure the
unit is disconnected from the power
source and the circuit breaker is turned
OFF.
Prior to installation, test for live circuits or
wiring inside the wall before cutting or
drilling into the wall. Before working near
any electrical circuit or wiring, remove all power and
use a circuit tester to verify the power has been
disconnected. Contact with live electricity can cause
serious bodily injury and in some cases death.
CAUTION
These cautions indicate a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury. Follow all instructions related to
installation and/or maintenance of this product.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory, or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instructions concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
To prevent a metallic taste or increased metal content
in the water due to an electrolysis process caused by
electrical feedback from the grounding of electrical
equipment to water supply and water waste mains,
connect to these mains using non-conductive
materials. The provided Filter meets this requirement.
Tripping Hazard
Personal injury can result from tripping over
power cords, tools, or other installation items.
DO NOT leave items laying around the work area.
Cutting Hazard
The installation of this product requires using
power tools.
Keep hands away from the cutting edge of any
tool used in the installation of our product.
Placing fingers in or around the cutting blades
could result in serious personal injury.
Use Proper Tools
Always use proper tools which are in good
working condition during the installation of
the product.
2.4 Property Damage
Inspect Before Cutting
Make sure no electrical wiring or plumbing is
present before cutting into a wall.