KNX Metering gateway
Art. No. : 135 16 140
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. During installation and cable routing, comply with the
regulations and standards which apply for SELV circuits.
Fire hazard. Only use limited-capacity power sources according to EN 60950-1. Observe
the technical data.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Connection for M-bus devices
(2) Connection for wM-bus antenna
(3) Ethernet connection
(4) D0 connection for optical communication head
(5) Slot for micro SD card
(6) For future expansions; has no function
(7) Two S0 connections
(8) Power supply connection
(9) KNX connection
(10) Status LEDs
KNX Metering gateway
1/9
82594604
05.02.2016
