Elk ELK-M1EZ8 Скачать руководство пользователя страница 40

Страница: 40 / 68

M1EZ8 Installation and Programming

Page 40

[Effective w/Firmware 4.3.6]

123456789012345678901234567890121234

Z001: Sel

Prg

[Name of Zone]

123456789012345678901234567890121234

Z001:A=00 R=00

Byp=00 Tbl=00

Menu 10 - Zone Reporting Codes

12345678901234567890123456789012123

10-Zone Reportng
Codes

Zone Report Codes

Description of Option

Each of the 208 Zones has specific communicator reporting codes for Alarm, Restore,
Bypass, and Trouble. Using the up/down arrow keys, select the appropriate zone, then
press the right arrow key to begin programming of that zone.

The cursor starts at the 00 beside A (Alarm). Enter the desired two digit reporting code
and press the right arrow key to advance to the R (Restore). To jump the cursor to another
report without changing this one simply press the right arrow key. The next press of the
right arrow key after Tbl (Trouble) will advance the screen back to the beginning of that
zone. Range is 00 to FF. Default for all entries is 00 (no report).

NOTE: Each reporting code must be programmed according to the desired reporting
format. However, for SIA and Contact ID formats the actual reporting digits will be
produced by the control according to the type of alarm or event. The only programming
required to enable reporting with the SIA and Contact ID formats is to set the programmed
code to a non zero (0) value. See below:

Press RIGHT arrow key to select this menu. Press UP or DOWN arrow keys to select
another menu. The ELK key backs up one menu level. To exit press the * or Exit key.

NOTE: Enter a two digit value to enable a report code. To disable a report code enter 00. When SIA or Contact ID is the
reporting format, the two digit value can simply be 01 since the control automatically produces the correct code
according to the SIA or Contact ID protocol. For 4+2 pulse format, enter a value from 01 to FF. To enter the A thru F
HEX characters press the RIGHT arrow key to position the cursor under the desired digit, then press the UP arrow (shift)
key once. Each press of the 2 key will now produce the following: 2, A, B, C. Each press of the 3 key will now produce
the following: 3, D, E, F. Press the RIGHT arrow key to cancel shift and move to the next character. See Appendix for
a summary of the SIA and Contact ID codes.

Alarms

Restore

Bypass Trouble

Zone RCs

CID SIA CID SIA CID SIA CID SIA

01 = Burglar Entry/Exit 1

134 BA 134 B R 573 BB 370 BT

02 = Burglar Entry/Exit 2

134 BA 134 B R 573 BB 370 BT

03 = Burglar Perim Inst

131 BA 131 B R 573 BB 370 BT

04 = Burglar Interior

132 BA 132 B R 573 BB 370 BT

05 = Burglar Int Follower 132 BA 132 B R 573 BB 370 BT
06 = Burglar Int Night

135 BA 135 B R 573 BB 370 BT

07 = Burglar Int Nt Fllwr

135 BA 135 B R 573 BB 370 BT

08 = Burglar 24 Hour

133 BA 133 B R 573 BB 370 BT

09 = Burglar Box Tamper 137 TA

137 T R 573 TB 370 BT

10 = Fire Alarm

110 FA

110 F R 571 FB 373 FT

11 = Fire Verified

110 FA

110 F R 571 FB 373 FT

12 = Fire Supervisory

200 FS

200 F R 571 FB 373 FT

13 = Aux Function 1

150 UA 150 U R 572 UB ---- ----

14 = Aux Function 2

150 UA 150 U R 572 UB ---- ----

15 = Keyfob

---- ---- ---- ---- ---- ---- ---- ----

16 = Non Alarm

---- ---- ---- ---- ---- ---- ---- ----

17 = Carbon Monoxide

162 GA 162 GR

572 GB ---- ----

Based on the zone definition, the CID (Contact ID) or SIA formats for Zone Reporting Codes will be:

Alarms

Restore

Bypass Trouble

Zone RCs

CID SIA CID SIA CID SIA CID SIA

18 = Emergency Alarm

101 QA 101 Q R 572 QB ---- ----

19 = Freeze Alarm

159 Z A

159 Z R 572 ZB ---- ----

20 = Gas Alarm

151 GA 151 G R 572 GB ---- ----

21 = Heat Alarm

114 KA

114 K R 572 KB ---- ----

22 = Medical Alarm

100 MA 100 M R 572 MB ---- ----

23 = Police Alarm

120 P A 120 P H 572 PB ---- ----

24 = Police No Indication

120 P A 120 H H 572 PB ---- ----

25 = Water Alarm

154 WA 154 WR 572 WB ---- ----

26 = Key Mom Arm/Disarm ---- ---- ---- ---- ---- ---- ---- ----
27 = Key Mom Arm Away ---- ---- ---- ---- ---- ---- ---- ----
28 = Key Mom Arm Stay

---- ---- ---- ---- ---- ---- ---- ----

29 = Key Mom Disarm

---- ---- ---- ---- ---- ---- ---- ----

30 = Key On/Off

---- ---- ---- ---- ---- ---- ---- ----

31 = Mute Audibles

---- ---- ---- ---- ---- ---- ---- ----

32 = Power Supervisory

338 YT

338 YR

572 UB ---- ----

33 = Temperature

---- ---- ---- ---- ---- ---- ---- ----

34 = Analog Zone

---- ---- ---- ---- ---- ---- ---- ----

NOTE: On CID reporting the 3 digit code is preceded by a “1” for new events or a “3” for restore (previous reported) events.

WWW.DIYALARMFORUM.COM

Содержание ELK-M1EZ8





































































Результаты поиска

Содержание ELK-M1EZ8

Отзывы:

Похожие инструкции для ELK-M1EZ8

Бренды по названию

Популярные бренды

Elk ELK-M1EZ8, Руководство по установке

Результаты поиска

Содержание ELK-M1EZ8

Отзывы:

Похожие инструкции для ELK-M1EZ8

Бренды по названию

Популярные бренды