Elk ELK-M1EZ8 Скачать руководство пользователя страница 24

Страница: 24 / 68

M1EZ8 Installation and Programming

Page 24

[Effective w/Firmware 4.3.6]

123456789012345678901234567890121234

A1: Sel

Prg

Area 1

123456789012345678901234567890121234

A1 01:=060

Exit Delay1 Time

123456789012345678901234567890121234

A1 02:=030

Entry Delay1Time

123456789012345678901234567890121234

A1 03:=060

Exit Delay2 Time

123456789012345678901234567890121234

A1 04:=030

Entry Delay2Time

123456789012345678901234567890121234

A1 05:=No

AutoStay No Exit

Menu 03 - Area Definitions

Of the 8 potential areas (partitions), Area 1 is the first to display. Press the right arrow
key to program, or press the up or down arrow keys to select another area. To jump to a
specific area enter the number (1-8). The area name is displayed on the bottom.

The amount of exit time in seconds for all zones programmed as Exit Delay 1. Range is
045 to 255 seconds. Default value is 060.

NOTE: Due to the way force arm works, if

an Exit Delay 1 zone also has force arm enabled, its exit time will be the greater
of the time values for Exit Delay 1 or Exit Delay 2. Do not enable force arm on
Exit Delay 1 zones if this operation is not desired.

The amount of entry delay time in seconds for zones programmed as Entry Delay 1.
Range is 030 to 255 seconds. Default value is 030.

The amount of exit delay time in seconds for zones programmed as Exit Delay 2. Range
is 045 to 255 seconds. Default value is 060.

See note above regarding force arm

and Exit Delay 1 zones.

The amount of entry delay time in seconds for zones programmed as Entry Delay 2.
Range is 030 to 255 seconds. Default value is 030.

If Yes, the control will switch from AWAY mode to STAY mode at the end of the exit delay
time if no exit zone is violated (no exit detected).

NOTE: This tracks the longest of the

two exit timers

. All interior zones are bypassed in the STAY mode. Default value is No.

If this option is set to Yes (default), the exit procedures will be affected in three ways:

1) ADDITIONAL EXIT1 “GRACE” FEATURE - During the initial Exit Delay 1 time if the
zone violates a second time and restores, the exit timer will automatically restart one
time. I.E. If the Exit1 door is opened, closed, and then opened again the timer will restart.

NOTE: This only works on Exit Delay 1 zones and the timer only restarts one time.
It does NOT work if the zone is enabled for force arm!

This features complies with

the SIA CP-01 false alarm reduction standard.

2) SPOUSE “LEAVE FOR WORK” OR “LET PET OUT” FEATURE - If the system is
armed in one of the Stay modes, a User may press the Exit key to re-start the exit delay
time in order to open an exit/entry door and leave for work. The system remains in the
Stay mode for remaining family members that are still in the house. This can also be
used to let a pet outdoors. When the pet is ready to come back inside the User simply
presses the Exit key again to restart the timer.

3) GOING FROM STAY MODE TO AWAY MODE - If the system is armed in one of the
Stay modes, a User may change the arm mode to Away. This is done by pressing the
Exit key twice in short succession (within 3 seconds) and leaving the building.

123456789012345678901234567890121234

A1 06:=Yes

Exit1TimeRestart

12345678901234567890123456789012123

03-Area

Definitions

Area Defintions

Description of Option

* SIA

CP-01

* SIA

CP-01

Press RIGHT arrow key to select this menu. Press UP or DOWN arrow keys to select
another menu. The ELK key backs up one menu level. To exit press the * or Exit key.

Exit Error

If an entry/exit zone is violated at the time the Exit Delay time expires, the

Exit Error Feature

will be

activated. The local siren will sound immediately and the Entry Delay warning will begin. If the control is not
disarmed before the Entry Delay expires, the communicator will report the alarm along with an Exit Error code,
provided these codes are programmed. An Exit Error event flag will also be set which can be used by the
“Whenever/And/Then” rules (refer to the ELK-RP software) to sound a siren, or blink a light, or whatever.
Exit Error feature complies with the SIA CP-1 false alarm reduction standard.

WWW.DIYALARMFORUM.COM