Eliwell EWPlus 902 Скачать руководство пользователя страница 14

Страница: 14 / 92

dOn

2 delay (at) On compressor. Delay time in activating the compressor relay after switch-on of

instrument.

dOF

2 delay (after power) OFF. Delay after switch off; the indicated time must elapse between switch-off of

the compressor relay and the successive switch-on.

dbi

2 delay between power-on. Delay between switch-ons; the indicated time must elapse between

two successive switch-ons of the compressor.

OdO (!) 2 delay Output (from power) On. Delay time in activating the outputs after switch-on of the instrument

or after a power failure.

DEFROST

dty

1&2

defrost type. Type of defrosting.

0 = electric defrost - compressor off (OFF) during defrosting;

1 = reverse cycle defrost (hot gas); compressor on (ON) during defrosting;

2 = Free defrost; defrosting independently of compressor.

dit

1&2 defrost interval time. Interval between the start of two successive defrosting operations.

dCt

defrost Counting type. Selection of count mode for the defrosting interval.

0 = compressor operating hours (DIGIFROST® method);

Defrosting active only if compressor is on;

1 = Real Time - equipment operating hours; defrost counting is always active when the

machine is on and start everytime the instrument switch on;

2 = compressor stop. Each time the compressor stops a defrosting cycle is performed

according to parameter dtY.

dOH

2 defrost Offset Hour. Start-of-defrosting delay time from the call.

dEt

1&2 defrost Endurance time. Defrosting time-out; determines duration of defrosting.

dSt

1&2 defrost Stop temperature. Defrost stop temperature (defined by the evaporator probe).

dPO

2 defrost (at) Power On. Determines if at the start-up the instrument must enter defrosting (if

the temperature measured by the evaporator allows this operation). y = yes; n = no.

EVAPORATOR FAN

FPt

2 Fan Parameter type. Characterizes the ‘FSt’ parameter that can be expressed or as an absolute

temperature value or as a value related to Setpoint. 0 = absolute 1 = relative.

FSt

1&2 Fan Stop temperature. Fan lock temperature; if the value, read by the evaporator probe, is

higher than the set value, fans stop.

Содержание EWPlus 902





























































































Результаты поиска

Содержание EWPlus 902

Отзывы:

Похожие инструкции для EWPlus 902

Бренды по названию

Популярные бренды

Eliwell EWPlus 902, Руководство по установке

Результаты поиска

Содержание EWPlus 902

Отзывы:

Похожие инструкции для EWPlus 902

Бренды по названию

Популярные бренды