Rev. 041217 DR
3
www.eliteproav.com
Preparing the installation surface:
The Insta-DE 2 product is to be solely installed on flat surfaces. Prepare the flat wall/surface by
cleaning the entire area. Do not install if any imperfections are found on the surface such as drilled
holes, glue/tape residue, dents, etc. We recommend sanding the area first to make sure you have a
clean flat and smooth surface. Failure to remove such imperfections can damage the product. The
dry erase function of this product requires a smooth writeable surface and EliteProAV is not
responsible should these instructions are not be properly followed.
Take the Insta-DE 2 film out of the package, unroll it on a clean surface and lay it on its front side.
Before applying the Insta-DE 2, the application surface must be dry, clean, smooth, and structurally
sound.
1.
Clean the surface to remove any dirt, grease, and wax.
2.
Fill any depressions or holes with a drywall compound
3.
Use sandpaper to smooth any bumps and blemishes. Sand until the surface is completely flat.
4.
Level-5 finish to the surface and apply one coat of Professional R-35 primer.
The warranty of this product will be voided if any bubbling occurs due to the use of an after-
market spray adhesive or if the screen was applied on to a textured wall.
Installation:
We strongly recommend two or more people for this installation.
1.
Smoothen the entire surface of the wall with sandpaper.
2.
Clean the entire surface with a wet sponge or lint-free towel to remove any dust left from sanding the
wall.
3.
Measure and draw line around the screen installation area.
4.
Apply the included double-sided tap over the line. Do not remote the top film of the tape
5.
Pour an entire powder bag into a paint bucket filled with 27 oz. of room temperature water and stir
until all lumps are gone and the compound has a syrup texture. This will make the mixture into an
adhesive compound for sticking the film to the wall.
Note: Once the compound has been mixed, it must be applied within 4 hours to ensure a sealed installation
of the Insta-DE2 to the wall. Use one bag for every 27 oz. of water.
Wall
