ELITEL V700L, Руководство пользователя

Страница: 11 / 89

V700L Managed Single Master / Slave LAN Extender
USER’S MANUAL Ver. B.2
10
Slave side (point to point application). ( Figure 2.1 )
Figure 2.1 V700L line ports straight connection

When inserting a RJ-11 plug, make sure the tab on the
plug clicks into position to ensure that it is properly
seated.

Do not plug a RJ-11 phone jack connector into the
Ethernet port (RJ-45 port). This may damage the
modem. Instead, use only twisted-pair cables with RJ-45
connectors that conform to Ethernet standard.
Notes:
1.
Be sure each twisted-pair cable (RJ-45 Ethernet cable)
does not exceed 100 meters (333 feet).
2.
We advise using Category 5~7 UTP/STP cables for
making Ethernet connections to avoid any confusion or
inconvenience in the future when you attach high
bandwidth devices.
3.
Use 24 ~ 26 gauge twisted pair phone wiring, we do not
recommend 28 gauge or above.
4.
Be sure phone wire has been installed before the
V700L boot.
5.
Do not connect Line port with RJ-11 and Terminal block
to two Master / Slave device
2.5 Point to Point Application
First a quick overview on a complete setup of LAN extender Master/Slave LAN extender.