background image

Page 9 of 12 

 

ROUTINE CHECKS AND MAINTENANCE 
 

1. 

Upholstery 

Upholstery should be routinely cleaned with a mild soap and water solution.  Never use 
paint remover or thinners on upholstery. 
 
 2. 

Metal Parts 

Clean all metal parts with a wax compound such as car wax to maintain finish.  Do not 
use any obtrusive cleanser that will scratch the finish on the chair. 
 
3. 

Cross Brace 

Periodically lubricate the centre bolt on the cross brace with light machine oil. 
 
4. 

Tyres and Wheels 

Examine tyres regularly for wear and replace as necessary.  Solid tyres should be 
replaced when they become loose on the rim or cracks appear which expose the mounting 
wire groove.  For preumatic tyres, check tyre pressure is even and correct.  Check that the 
wheels run freely and that quick release axles are correctly locked. 
 
5. 

Castors 

Check periodically that the bolt and nut securing the wheel to the castor fork is tight and 
allows a snug but free spinning fit. 
 
6. 

Brakes 

Regularly check for effective operation and there is no wear or signs of play. 
 
7. 

General 

Always check before use that the wheelchair folds and unfolds correctly and that 
movement both backwards and forwards is in a straight line. 
 
8. 

Servicing 

We recommend your wheelchair is fully serviced every twelve months.  For parts and 
service information, please contact the shop where you purchased this wheelchair.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание ECTR 01












Отзывы: