Elite Phoenix Gold, Руководство пользователя

Страница: 3 / 8

© 2012 Phoenix Gold • www.phoenixgold.com
Elite Amplifier Owner’s Manual
SUBWOOFER CHANNEL
Frequency Response: ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >100dB
Low Pass Crossover: 24dB per Octave
Subsonic Filter: 24dB per Octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 1 ohm
Typical Efficiency: 85%
Damping Factor: Greater than 200
RMS Power 14.4Vdc ≤ 1% THD 700 x 1 @ 2 ohms
1100 x 1 @ 1 ohm
SPECIFICATIONS
FRONT AND REAR CHANNELS
Frequency Response: ± 1dB from 20Hz to 50kHz
Signal to Noise Ratio: >110dB
High and Low Pass Crossovers: 18dB per Octave
Front/Rear High Pass Crossover Range: 20Hz to 4kHz
Rear Low Pass Crossover Range: 40Hz to 4kHz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 4 ohms Bridged or 2 ohms Stereo
Typical Efficiency: 55%
Damping Factor Greater than 200
RMS Power 14.4Vdc ≤1% THD 100 x 4 @ 4 ohms Stereo
150 x 4 @ 2 ohms Stereo
300 x 2 @ 4 ohms Bridged
Recommended Fuse Size: 150 amp
Power/Ground Wire Size: 1/0 Gauge
Dimensions: 23.3” L x 10.5” W x 2.6” H
592mm L x 267mm W x 66mm H
A NOTE ABOUT SPECIFICATIONS....
Elite amplifiers were engineered to be the best sounding mobile amplifiers on the
planet. Numbers on this sheet of paper can not truly convey the dynamics and
realism these amplifiers can deliver. Enjoy!
Note: A power birth certificate is included for each amplifier. Elite
amplifiers are VERY CONSERVATIVELY rated and will exceed the
RMS power rating by up to 30%.