Elite EliteARC 160 S, Руководство пользователя

Страница: 62 / 65

Keep Working
www.ELITETOOLS.co
24
Failure Possible cause
Solution
No output power
• No power supply.
• Inappropriate fuse or breaker.
• Thermal protection in operation. • Check connection
• Wait for the thermal protection
to stop working.
Absence of arc
• Torch trigger damaged.
• Damaged power switch.
• Work cable, torch or switch
disconnected
• Check cables, power switch
and torch trigger.
Poor arc ignition
• Improper ground clamp connection
• Argon with impurities
• Tungsten out of specification or
damaged.
• Check cables, gas and
tungsten.
Poor quality of
weld bead
• Contamination on the work surface
• Argon with impurities
• Poor Argon flow
• Contaminated tungsten • Clean workpiece
• Check gas
• Check tungsten.
Tungsten is
consumed quickly
• High amperage
• Very thin tungsten
• Inverted polarity
• Poor Argon Flow
• Lower output current
• Use a thicker tungsten
• Use correct polarity
• Check gas
Warning
: Never try to repair the machine or uncover it. We are not responsible
for any accident that occurs due to improper maintenance of the equipment.
The equipment is designed for a long useful life, but this depends largely on the
good handling and care that is given to the equipment. Poor maintenance or lack
of maintenance is grounds for voiding the warranty.
If the cause of the machine malfunction is not one of those listed above, send the
equipment to a service center for inspection.