Elite EliteARC 160 S, Руководство пользователя

Страница: 61 / 65

Keep Working
www.ELITETOOLS.co
23
Ignition TIG LIFT ARC
1. PLACE THE TORCH IN
POSITION.
2. BRING THE TORCH
CLOSE AT A DISTANCE OF
2 TO 4 MM AND PRESS THE
TRIGGER TO START THE
HF.
3. HOLD THE TRIGGER TO
START THE ARC.
7. Service and Maintenance
Maintenance
The welder has been built for long periods of use with a minimum of maintenance. The
operation of the machine in the long term with satisfactory performance depends on the
correct care of the machine and its periodic cleaning.
Cleaning - unplug machine before cleaning
Periodically clean the welder using a soft cloth, preferably after each use. Keep the vents
free of dust and dirt and if they cannot be easily removed use a damp cloth with water and
a little soap. Never use solvents derived from petroleum, alcohol, etc. they can damage
the plastic parts of the machine.
Lubrication
The machine does not need additional lubrication.
Diagnostic
If the machine does not function normally, suspend its use and use the following table to
find the possible cause and its respective solution.