Elite CSW-200, Руководство по установке

Страница: 10 / 33

A D J U S T M E N T O F O U T P U T S H A F T
2. Place the red handle in 90° position.
By tightening the nut you will be able
to adjust the clutch.
A. Release the red handle and open the gate to a distance desired. Loosen the bolt (as shown in picture
“A”). Turn plastic part until the half moon shape hits the limit switch. For closing cycle, do the same.
B. For a more precise adjustment, you may use the set screw (picture “B”).
3. Place the red handle back in its
original position.
4. Pull the short arm away from the gate.
Make sure slipping does not occur, if it
does, then repeat step no. 2 & 3.
A
B
1. Make sure the pin fits in the notch
as shown above.
A D J U S T I N G G A T E T R A V E L I N G D I S TA N C E