081021-BR
3
3. Make sure all 4 corners of the frame are at a 90° angle and the hinged support bar is straight and not
bending. (Fig. 7-9)
4
．
Insert the frame
legs (B)
into the openings located at the left and right
bottom sides of the
folding frame (A).
Secure them by fastening the
knob
screw
(E) into the adjacent hole. The added support behind the
leg will be
added in a later step.
5.
Next, screw the
eyebolts (F)
into the openings located at the top of the
frame (Fig.11).
6.
Take the
screen material (D)
out of the
screen material bag (C)
and align the corners of the screen
material with the inside corners of the frame. Unfold as shown in the diagram (Fig.12-13).
Fig.12
Fig. 13
7.
Once the
screen material (D)
is fully extended, secure the material by snapping the buttons onto the
frame studs as shown in Fig. 14-16. Fasten the buttons in the following order AB→CD→EF→GH.
H
D
Fig.15
Fig.16
A
G
E
C
B
Fig.14
F
Fig. 10
Fig. 11
Fig. 7
Fig. 8
Fig. 9
