Rev. 090618
6
ELITESCREENS.com
10. At least two people are needed for this step. Open the front side of each
folding leg (B)
and carefully
lift the top of the frame to stand up the screen. While keeping a hold on the screen, open the other side of
each folding leg and fasten the last
knob screws (I)
on the back sections of the legs and frame.
11. To secure the screen, hammer the
stakes (H),
at your
desired location, into the ground.
12. Finally, tie the 4
ropes (G)
to the
stakes (H)
to
prevent the screen from tilting or falling over. Your
screen should look like figure shown (right).
Screen Disassembly
1. Remove
ropes (G) and stakes (H)
from the ground.
2. At least two people are needed for this step. Unscrew the
knob screws (I)
on the back sections of the
legs and fold the hinges so that half of the legs are folded up. Slowly lower the screen to the ground
(towards the closed legs).
3. Unlatch the hinged support bars and fold down other half of the legs.
Note for 180" models:
To help level the screen, adjust the
center
support leg (C) or (J)
by tightening or
loosening the knob at the bottom of the
