Rev. 070120-BR
2
Assembly
1
．
After the initial assembly of the screen frame, insert
the extension legs into the openings located at the left
and right bottom sides of the folding frame. Secure them
by fastening the knob screw into the adjacent hole. Next,
screw the eyebolts into the openings located at the top of
the frame (Fig.1)
2.
Next, lift the screen up while simultaneously opening the frame legs. Ensure the legs are locked in
place by pressing down on the hinges near the bottom-center of each leg. Two people are needed for this
step.
(Fig.2)
3.
Slowly lift the additional back-leg and connect it using the knob screw as shown on
Fig.3
.
4.
Lastly, make sure your screen is secure and stable. Make any adjustments if needed. The installation is now
complete.
Note: Refer to Yard Master 2 User Guide for additional steps on securing your screen.
Disassembly
1.
Remove ropes and stakes from the ground, if needed, then unlatch
the hinged support bars on front side of each leg so that it is bent. Fold
that half of the legs up for the next step.
Fig.1
Fig.2
Fig.3
