Rev.053117 DR
4
www.elitescreens.com
CineTension Plus
Series | Controls and Accessories
A. IR Remote
B. RF Remote
C. Wall switch control box
D. 5-12 volt trigger cable
E. IR extended “eye” receiver
F. Wireless 5-12v trigger cable
G. AAA batteries
Screen operation
Electric Current
: Depending upon region, your Elite Screen will operate on 110v, or 220v voltage.
1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet.
2. Once the screen’s has power, you’ll be able to control it using any of the 6 methods described below.
6 ways to control your CineTension Plus
1.
IR remote control
(
Item A, Fig 1
)
and IR “Eye” Receiver
(
Item E, Fig 2)
:
The Infrared functions by direct line of sight contact with a beam range of 30
feet. The IR “Eye” receiver plugs directly into the screen’s RJ-45 input to
present a low profile line-of-sight control option for your IR remote control
even in a recessed ceiling installation. Once connected, simply aim the IR
remote at the IR “Eye” receiver to control the screen.
2. RF Remote Control
(
Item B
): The radio waves eliminate the need for a
direct line of sight with a range of 100 feet.
Fig.2
UP
STOP
DOWN
IR “eye” receiver
Fig.1
IR/RF remote
3. 3-Way Wall Switch
(
Item C, Fig 3
): The 3-way wall switch
is a wall mount control box with an up/stop/down button and
plugs directly into the screen’s RJ-45 input.
Fig.3
3 Way Wall Switch
(does not have IR sensor)
