Rev.053117 DR
3
www.elitescreens.com
A
L
M
Clockwise
rotation
L
A
A
B
C.
D.
Installation Instructions
Recessed Installation
1.
Select the installation location for your screen. Measure the distances between each eye bolt (Shown as
measurements L and A in Fig.1). Mark the installation area on the ceiling based on the measurements
taken. Using the marks as a guideline, drill a hole in the ceiling for each suspension bolt. The distance
between the installation hole (M) and the wall should be no longer than the measurement A. Insert one
eye bolt of the M10 Suspended hooks into the predrilled holes.
2.
Connect the center component of the M10 Suspended hooks to the eye bolts installed above the ceiling.
Once properly secure, connect the third component of the M10 Suspended hooks. Attach the suspended
hooks(4xM10) individually to each of the 4 eye bolts located on the top of the screen (A/B/C/D) .
3.
After the installation is complete, if the screen is not leveled, you can adjust the height of the suspended
hooks to level the screen. Below are the adjustment methods for the suspended hooks.The maximum
and minimum adjustable lengths are shown in Fig 3.
①
②
③
④
Hole
（
Fig.3
）
（
Fig.1
）
Ceiling
Wall
Suspended hook
1
2
3
Counter-
clockwise
rotation
（
Fig.2
）
The Screen
