REV040819BR-Z
www.elitescreens.com
4
Step 9.
Two people are suggested for this step. Place the
Center Support Bar (I)
into the top groove on the back of the frame (not the one where the
spring inserts) and align with the screw holes on the frame at the approximate center point of the frame. Carefully pull the bottom horizontal frame
outward and also align the
Center Support Bar
(I
) with the screw holes on the frame. Carefully release the frame once the bar is centered. Secure
the bar using the S
mall Screws
(D)
. See illustrations below for details:
Step 10.
After the
Center Support Bar
(I) has been
secured, hook the center of the vertical portions of the material (2).
Be sure to hook the
Springs (B) onto the Tension Rod (H) to avoid damage to the screen material.
Next, return to the vertical sides, securing the remainder of the
springs (3). Lastly, secure the remaining springs of the horizontal sides (4).
(Top of backside of frame)
(Bottom of backside of frame)
1
1
1
1
1
2
2
1
4
4
3
3
Top groove
Small screws
