User manual
Aeon series fixed frame
–
AR2-S
Rev. V05242022DT (DS0207)
Elite Screens
12
Notice to Installer:
Please use the following installation instructions to obtain superior optical performance from the Retro
Reflective CLR
®
/ALR (Ceiling/Ambient Light Rejecting) StarBright™ 9 Screen.
The following guidelines should also be followed.
1. Minimum throw distance of 1.5 x the image width
• Avoid a
hotspot
effect
•
Light absorption
– The angle of incident
light is too steep and will get absorbed by the
optical lenses. This will create a very dim
image and affect the overall picture quality.
2. Ambient light should not come from the same
direction as the projector’s light
3.Not compatible with ultra/short-throw projectors
4. Do not install the standard-throw projector at
an angle that is greater than 5° off the vertical
axis from the screen. The ambient light filtration layer in the material is designed to absorb off-axis light
rather than reflect it.
Installation
Pre-installation and preparation
1)
Determine where the screen will be installed and mark four holes points according to the
horizontal and vertical wall bracket distances, ABCD.
•
AB / CD
Horizontal
Distances are 78.9” (2005mm) apart
•
AC / BD
Vertical
Distances are 28.9” (734.5mm) apart.
※
Please make sure that points AB and CD are measured horizontally, and points AC and BD are
measured vertically.
AB/CD Horizontal Bracket Distance:
78.9” / 2005 mm
7” / 180 mm
A
B
D
C
7” / 180 mm
AC/BD Vertical Bracket Distance:
28.9” / 734.5 mm
Proper Projector Placement
Image is not up to scale and is
for illustrations purposes only.
