Rev. 072318-BR
2
www.elitescreens.com
Hotspot Disclaimer
The reflective properties of the WraithVeil rear projection material may cause a hot spot. This is normal for this material
and thus, the following should be considered to reduce the possibility of having a hotspot.
What is a hotspot on a projection screen?
A Hot Spot is a bright spot that is visible from anywhere you view the screen from. This is a common occurrence in rear
projection screens; essentially a hot spot is when you can see the projector bulb through the screens surface.
• Reduce the output power of the projector (choose a lower lumens setting like Cinema)
• Avoid using ultra/short-throw projectors since the bulb will be very close to the material
• Move the projector further away from the screen. This will increase the throw distance of the projector, and will
effectively reduce the brightness of the image.
• Reposition the projector relative to the audience. Raising the projector’s height or lowering it so it is not projecting
directly on the material. Use vertical lens shift to achieve this and correct it with keystone.
• Position it off to the side will help relocate the hot spot so that it would only be visible from a location not within the
“audience”.
We take great care in packaging the Designer Cut series of materials so that they arrive at your doorstep with zero issues.
Should your screen arrive with any shipping damage or show signs of damage, we urge you to contact us directly so that
we can provide a speedy resolution – we always strive for the best customer experience and are here to help.
For Technical Support or an Elite Screens Contact in your area, visit
www.elitescreens.com or call 1.877.511.1211
