V051616-EA
Support bar installation (for models
1.
Position the
center support bar (E)
and
hex screws (G)
in the areas of the
shown in fig 1. Align the hole on each end of
the support bar with the
M6 hex screws
(G)
located at the top and bottom frame
sections.Then fasten with the
M6x12 screws
(I).
2.
Position the
Corner support bars (N)
fig 2. Align the holes on each end of the corner support
vertical and horizontal frame sections. Then fasten with the
Center Support Bar
Corner Support Bar
Align the M6
screws with the
two holes on the
Corner Support
Bars.
Figure 1
www.elitescreens.com
(for models 180” and above)
:
and
M6
of the frame
hole on each end of
M6 hex screws
located at the top and bottom frame
M6x12 screws
Corner support bars (N)
and
M6 Hex screws (G)
in the areas of the frame as shown below in
fig 2. Align the holes on each end of the corner support bars with the M6 hex screws
vertical and horizontal frame sections. Then fasten with the
M6x12 screws (I
).
Center Support Bar
Align the M6 Screws with
the two holes located on
the Center Support Bar.
Move the
M6 hex screw (G)
to these areas of the frame.
8
in the areas of the frame as shown below in
bars with the M6 hex screws located on the
to these areas of the frame.
