V051616-EA
www.elitescreens.com
7
6.
If the material is too loose or tight after adjusting all four corner sides, then you will
need to reattach the material.
Please follow the steps below to properly remove the screen material from the frame. This procedure will ensure
prolonging the life of the screen material.
Screen Material Removal
1.
Detach the velcro from the frame.
2.
Gently pull back the material to release the material from the velcro connections on the corners.
Support bar installation (for models under 180”)
:
1.
Position the
center support bar (E)
in the middle of the frame and align the hole on each end of the support bar
with the
M6 hex screws (G)
on the top and bottom frames.Then fasten with the
M6x12 screws (I).
Move the
M6 hex screw (G)
to the middle area of the frames.
Align the M6 screws
with the two holes.
Pull back the screen material from
the velcro connection along the
edges of the frame to detach it.
Ce
nt
er
S
up
po
rt
ba
r
