042717DR
9
4.
After the bezel trim has been installed, place a
corner sleeve
(M)
on all four corners. Begin by aligning and
adjusting the corner sleeve through the front of the screen. Make sure the corner sleeve completely wraps the edge
of the bezel trim. This should cover any corner gaps.
Once all corner sleeves have been snapped into each corner of the frame, it is ready to be wall installation.
Diagonal Size Note
The Diagonal Size of the AR100H-CLR before and after installing the edge trim strip.
Before installing the trim strip
After installing the trim strip
Front side
Back side
The
front side
of the frame with trim pieces attached.
A
B
F
C
D
E
Corner gap
will be
covered by
the
corner
sleeve (M).
Figure 3
White area
signifies
corner gap.
