Rev. 12/6/18
6
eliteproav.com
Screen removal from the Mounting Brackets
1.
Pull down on the
Mounting Bracket Release Tab
and remove the bottom case away from the wall/ceiling
followed by the top of the case.
Release Tab
Pull bottom of case first away from wall/ceiling
Control for Yard Master Electric Series
RF Remote Control
: The radio waves eliminate the need for a direct line of sight with a range of 100 feet.
Synchronizing the Control to the Yard Master Electric Screen
1.
Unplug the power source from the EliteProAV Electric Screen.
2.
Press and HOLD the STOP Button. (See diagram above)
3.
White holding the STOP button, plug the screen back into the power outlet.
a.
Should hear a single “beep” when plugging the screen in.
4.
After you hear a set of multiple “beeps”, release the STOP button.
5.
You should now be able to control your electric screen with the RF remote control.
If unsuccessful repeat from Step 1.
Note: The beep(s) the screen produces is very faint. It may be difficult to hear, if more than 5 feet away from
the screen.
UP
STOP
DOWN