Rev. 12/6/18
3
eliteproav.com
Pre-Installation
1.
Carefully unpack the screen.
2.
Always handle the screen in a leveled position on a clean surface.
3.
In order to protect the screen from exposure to stains, keep the screen out of contact with foreign
particles such as dust, sawdust, and/or liquids.
NOTE
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling
on the viewing surface will not cause the casing to become loose or fall. The installer must insure that the
fasteners used are of adequate strength and suitable for the installation location.
Hardware Parts List for Yard Master Electric Series
A. Mounting Bracket
x2pcs
B. M10 Anchor and M4x50
Screw x4pcs
C. M8x35 Anchor and
M4x35 Screw x4pcs
D. Suspended Ceiling
Bracket Connector x2pcs
E. M5x15 Screw& Bolt
x4pcs
F. RF Remote Control x1pcs
&AAA Battery x2pcs
G. Magnetic weight bar
bracket x2pcs
H. Curved Nail x2pcs
I. Hook x2pcs
J. Elastic String x2pcs
H
．
Bubble leveler x1pc
Flush Mount to the Wall
1.
Mark the location of where the screen is to be installed, drill your holes and insert the
M10Anchors (B).
2.
Install the
Mounting Brackets (A)
to the wall and secure with the
M4x50 Screws (B)
.
Mounting bracket
Fix Plate 1
M4x50 Screw
Mounting Bracket
Fix Plate 2
Mounting Bracket
Wall
Anchor