background image

09142022JA                                                                 

www.eliteproav.com

                                                       

U00258 

 

Installation Instructions

 

For installation assistance, please consult a professional Installer. Elite ProAV is not liable for faulty installations. 

 

A.

 

  Wall Mount | Brackets (movable position) 

Step1: 

Determine where the screen will be installed. Mark the screw 

hole locations, drill the holes and insert the hollow wall anchors (D)   
[

if installing on drywall

] and secure with a screw(C). 

 

 

 
 

 
 

Step 2: 

1. Install the wall bracket (A) to the wall. 
2. Mark the center of the bottom hole with a pencil.   
3. Remove the wall bracket (A), drill the holes, and insert the hollow wall anchors (D). 

 
 
 
 
 
 
 
 
 
 

Step 3: 

Use M5 screws (F) to connect the wall bracket (A) to the bracket connector (H).

 

 
 
 
 
 
 
 
 
 
 
 

Step 4: 

Hang the screen on the wall and lock the lower hole with 5x50 wall screws (C). Slide the screen left or 

right if needed to position it accordingly.

 

 
 
 
 
 
 
 
 
 
 
 
 
 

Size 

X=Wall bracket distance 

106” 

1800 mm (70.87”) 

125” 

2200 mm (86.61”) 

140” 

2500 mm (98.43”) 

The third is installed in the center 

Don’t tighten the screw. 
Leave about 5mm (0.2”). 

Содержание Tab-Tension Pro Series






Отзывы: