V03182021-JA
www.eliteproav.com
7
Wall Installation
Step 14:
Measure the overall length and height of the frame and drill holes for the top brackets. Line up the
wall brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver.
If not installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws
with a screwdriver. Make sure the brackets are leveled.
Step 15
: Position the fixed frame screen onto the top wall brackets as shown below and push down at the
center of the top of the frame to secure.
Step 16:
With the frame slightly tilted outward; connect the bottom brackets onto the bottom groove of the
frame. Then secure them by screwing onto the wall.
For Technical Support or an Elite ProAV contact in your area, visit
www.eliteproav.com
