Elite ProAV Presenter Pro CLR 2, Руководство пользователя

Страница: 7 / 8

Rev.08012022JA www.eliteproav.com 7
4. Begin the removal of the screen material by unbuttoning it from the corners, the top/bottom side, and the
detaching the velcro left/right sides.
WARNING: DO NOT snap them off rapidly. Gentlly remove one by one to avoid damaging the material.
5. Each person grabs each corner pull-tab and lift the material carefully not allowing the material to sag in
the middle but assuring it is pulled so it can be flat.
6. Then, lay the protective foam sheet on the material to prepare and place the inner core tube at the end
as shown below.
7. Roll the material by the ends only (black masking border).
CAUTION: DO NOT ROLL THE MATERIAL FROM THE
MIDDLE AREA TO AVOID PERMANENT DAMAGE.