Rev.04/28/17 DR
2
www.eliteproav.com
Hardware Parts List
Please make sure all parts listed below are included before proceeding with the installation.
A. M5x60 Screw x4
B. M12 Dry-wall
anchor x4
C. Bracket connector x2
D. M5x25MM round head
cross screws x2 & M5 nut x2
E. M5x30MM eyebolt
screw & M5 nut x2
F. Hidden wall
bracket x2
G. R18xR6x1
washer x4
H. Snap link x2
I. Bead chain tensioner x1
J. M4x32 Screw x2&M8
Dry-wall anchor x2
Installation Instructions
For installation assistance, please consult a professional Installer. EliteProAV is not liable for faulty installations.
A. Wall Mount
Flush hidden mount (movable position)
This installation method allows the screen to slide horizontally.
1. Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom screw
holes from each
hidden wall mount bracket
(F).
2. Drill a hole on all marked areas and install the brackets with the
dry-wall anchor
(B),
M5x60 screw
(A), and a
washer
(G).
Make sure both brackets are properly leveled.
3. Hang the screen by placing the
downward
“catch” located on the back over the brackets
upper
“catch”.
4. After making sure the screen is secured, you can slide it left / right to properly center it in position.
5. Lastly, screw the
M5 screw
(D) into the upper hole of the bracket to add additional support for the screen.
B. Ceiling Mount
Suspended
1. Screw the
eyebolt
(E) on the
bracket connector
(C).
2. Attach the
snap link
(H) through the
eyebolt (E)
and connect it to an eyebolt screw (not included) rated for the screen’s
weight.
Front view of bracket (F)
Side view of
bracket (F)
