6/29/17-JA
www.eliteproav.com
7
Step 13
: Install the
angle cover(j)
on each corner of the frame and install the LED light strip to hold down the
angle cover.
Then insert the
LED light clip (l)
to hold the LED light strip in place.
Notice to Installer:
Please use the following installation instructions to obtain superior optical performance
from the CineGrey 5D Angular Reflective ALR
(Ambient Light Rejecting)
Screen.
•Angular-‐Reflective material is not compatible with ultra/short-‐throw projectors
•Minimum lens throw ratio 1.5x image width
•Ambient light must not come from the same direction as the projector
Since angular-‐reflective means that the projected image will reflect at the mirror-‐opposite
angle, it is important to position the projector so that the viewer will get the best possible
image.
Step 1:
Establish the general “eye level” of the viewers
Step 2:
Set the appropriate projection level
Step 3:
Adjust the screen height level and projection angle
1
1
2
2
2
2